Opening/closing the garage door

Once programmed, the integrated garage door opener will assume the function of the garage door system's remote control. Please also read the operating instructions for the garage door system.

ignition lock. Turn the SmartKey to position 2 in the ignition lock.

overhead control panel that you have Press transmitter button 2, 3 or 4 in the overhead control panel that you have programmed to operate the garage door.

Garage door system with a fixed code:

indicator lamp 1 lights up green.

Garage door system with a rolling code:

indicator lamp 1 flashes green.

as long as the transmitter button is being The transmitter will transmit a signal for as long as the transmitter button is being pressed. After a maximum of ten seconds, transmission is terminated and indicator lamp 1 flashes yellow. Press the transmitter button again, if necessary.

    See also:

    Wet roads
    WARNING After driving in heavy rain for some time without applying the brakes or through water deep enough to wet brake components, the first braking action may be somewhat reduced. You have ...

    GVW (Gross Vehicle Weight)
    The gross vehicle weight comprises the weight of the vehicle including fuel, tools, the spare wheel, accessories installed, occupants, luggage and the drawbar noseweight, if applicable. The gr ...

    Cleaning genuine wood and trim elements
      Wipe the wooden trim and trim pieces with a damp, lint-free cloth, e.g. a microfiber cloth.   Heavy soiling: use car care and cleaning products recommended and approved by Mercede ...