Releasing the electric parking brake automatically

The electric parking brake is released automatically when the following conditions are simultaneously fulfilled:
• the engine is running.
• the automatic transmission is in position D or R.
• the hood is closed.
• your seat belt is fastened.
• you depress the accelerator pedal.

If the automatic transmission is in position R, the trunk lid must be closed.

If your seat belt is not fastened, the following conditions must be fulfilled to automatically release the electric parking brake:
• the driver's door is closed.
• you shift out of P or you have previously driven faster than 3 km/h.
• you have shifted out of P or you have previously driven faster than 2 mph (3 km/h).

    See also:

    Important safety notes
    WARNING The PARKTRONIC is a supplemental system. It is not intended to, nor does it replace, the need for extreme care. The responsibility during parking and other critical maneuvers always ...

    Seat belt
    Display messages Possible causes/consequences and Solutions After starting the engine, the red seat belt warning lamp lights up for six seconds. The seat belt warning lam ...

    Engine number
    1 Emission control information plate, including the certification of both federal and Californian emissions standards 2 Engine number (stamped into the crankcase) 3 VIN (on the lower edg ...