Automatic transmission

WARNING
It is dangerous to shift the automatic transmission out of parking position P or neutral position N if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal.

from position P to the desired position if It is only possible to shift the transmission from position P to the desired position if you depress the brake pedal. Only then is the parking lock released. If you do not depress the brake pedal, you can move the DIRECT SELECT lever but the parking lock remains engaged.

depressed. Depress the brake pedal and keep it depressed.

Release the brake pedal. Shift the transmission to position D or R.

Carefully depress the accelerator pedal. Release the brake pedal.

The electric parking brake is Carefully depress the accelerator pedal.

The electric parking brake is automatically released.

The red (Canada (USA only) or only) indicator lamp in the instrument (Canada only) indicator lamp in the instrument cluster goes out.

pulled away. The locking knobs in the doors The vehicle locks centrally once you have pulled away. The locking knobs in the doors drop down.
You can open the doors from the inside at any time.
You can also deactivate the automatic locking feature.

speeds after a cold start. This helps the Upshifts take place at higher engine speeds after a cold start. This helps the catalytic converter to reach its operating temperature more quickly.

    See also:

    Introduction
    The Settings menu can be used for: • restoring the factory settings • changing the instrument cluster settings • changing the time/date settings • changing the light settings • changing the veh ...

    Telescopic rod
    The telescopic rod can be used to secure the load against the rear seats to prevent it from moving around. ► Insert one mounting element 2 into each loading rail. ► Turn mounting el ...

    Opening/closing the garage door
    Once programmed, the integrated garage door opener will assume the function of the garage door system's remote control. Please also read the operating instructions for the garage door system. ...