Correct driver's seat position

Correct driver's seat position
Correct driver's seat position

Observe the safety guidelines on seat adjustment.

properly. Check whether you have adjusted seat 3 properly.

Electrical seat adjustment.

When adjusting the seat, make sure:
• you are as far away from the driver's air bag as possible.
• you are sitting in a normal upright position.
• you can fasten the seat belt properly.
• you have moved the backrest to an almost vertical position.
• you have set the seat cushion angle so that your thighs are gently supported.
• you can depress the pedals properly.

adjusted properly. Check whether the head restraint is adjusted properly.

When doing so, make sure that you have adjusted the head restraint so that the back of your head is supported at eye level by the center of the head restraint.

Observe the safety guidelines on steering wheel adjustment.

adjusted properly. Check whether steering wheel 1 is adjusted properly.
Adjusting the steering wheel electrically.

When adjusting the steering wheel, make sure:
• you can hold the steering wheel with your arms slightly bent.
• you can move your legs freely.
• you can see all the displays in the instrument cluster clearly.

Observe the safety guidelines for seat belts.

belt 1 properly. Check whether you have fastened seat belt 1 properly.

The seat belt should:
• fit snugly across your body
• be routed across the middle of your shoulder
• be routed in your pelvic area across the hip joints

mirror and the exterior mirrors Before starting off, adjust the rear-view mirror and the exterior mirrors in such a way that you have a good view of road and traffic conditions.
the seat, steering wheel and exterior mirror Vehicles with a memory function: save the seat, steering wheel and exterior mirror settings.

    See also:

    Snow chains
    For safety reasons, Mercedes-Benz recommends that you only use snow chains which have been specially approved for your vehicle by Mercedes-Benz, or are of a corresponding standard of quality. ...

    Cleaning the paintwork
    Scratches, corrosive deposits, areas affected by corrosion and damage caused by inadequate care cannot always be completely repaired. In such cases, visit a qualified specialist workshop, e.g. an ...

    Restarting the tire pressure monitor
    WARNING It is the driver's responsibility to set the tire pressure to the recommended cold tire pressure. Underinflated tires affect the ability to steer or brake the vehicle. You might lose ...