Instruction labels for tires and load
WARNING
Do not overload the tires by exceeding the
specified load limit as indicated on the Tire
and Loading Information placard on the
driver's door B-pillar. Overloading the tires
can overheat them, possibly causing a
blowout. Overloading the tires can also result
in handling or steering problems, or brake
failure.
Two instruction labels on your vehicle show the maximum possible load.
(1) The Tire and Loading Information placard on the B-pillar on the driver's side. The Tire and Loading Information placard shows the maximum permissible number of occupants and the maximum permissible vehicle load. It also contains details of the tire sizes and corresponding pressures for tires mounted at the factory.
(2) The vehicle identification plate is on the B-pillar on the driver's side. The vehicle identification plate informs you of the gross vehicle weight rating. It is made up of the vehicle weight, all vehicle occupants, the fuel and the cargo. You can also find information about the maximum gross axle weight rating on the front and rear axle.
The maximum gross axle weight rating is the maximum weight that can be carried by one axle (front or rear axle). Never exceed the maximum load or the maximum gross axle weight rating for the front or rear axle.
B-pillar (example: Sedan)
1. B-pillar, driver's side
See also:
Important safety notes
For reasons of safety, Mercedes-Benz
recommends that you drive with the lights
switched on even during the daytime. In some
countries, operation of the headlamps varies
due to legal requirements a ...
Conditions for activation
RACE START can be activated when:
- the doors are closed.
- the engine is running and it has reached an
operating temperature of approximately
176 °F (80
°C). This is the case ...
2012 Mercedes-Benz CLS-Class Review by Carrie Kim
As I approached the all-new 2012 Mercedes-Benz CLS-Class, I was filled with a
mix of elation and bona-fide terror. It's similar to when you walk into a very
nice home and the first thing you say t ...