Floormat on the driver's side
WARNING
Whenever you are using a floormat, make sure
there is enough clearance and that the
floormat is securely fastened.
The floormat should always be securely fastened using the fastening equipment. Before driving off, check that the floormat is securely in place and adjust it if necessary. A loose floormat could slip and hinder proper functioning of the pedals.
Do not place several floormats on top of each other as this may impair pedal movement.
•► Slide the seat backwards.
•► To install: place the floormat in the footwell.
•► Press studs 1 onto retainers 2.
•► To remove: pull the floormat off retainers 2.
•► Remove the floormat.
See also:
Tire characteristics
Tire data is vehicle-specific and may deviate from the data in the example.
This information describes the tire cord and the number of layers in sidewall
1 and under the tread 2. ...
Activating RACE START
Depress the brake pedal with
your left foot, and keep it depressed.
Turn the drive program selector
clockwise until the RS lamp lights up.
The multifunction display shows the RACE
START Conf ...
Making adjustments in 5 mph (Canada:
10 km/h) increments
Briefly press the cruise control lever
beyond the pressure point, up 1 for a
higher speed or down 2 for a lower speed.
The last speed stored is increased or
reduced. ...