EASY-PACK folding floor with stowage compartment under the trunk floor (Wagon)

Important safety notes

WARNING
Do not carry unsecured objects under the EASY-PACK folding luggage-compartment floor if it is open.

Otherwise, you and other vehicle occupants could be injured by objects being thrown around the vehicle in the event of sharp braking, a sudden change in direction or an accident.

! Do not apply pressure to the EASY-PACK folding luggage-compartment floor when it is fully open. You may otherwise damage the hinges of the EASY-PACK folding luggage-compartment floor.

Opening and closing the folding luggage-compartment floor

A removable insert under the EASY-PACK folding luggage-compartment floor contains the parts of the EASY-PACK load-securing kit and a folding box. Beneath the insert, you will find the TIREFIT kit, the "Minispare" emergency spare wheel, the vehicle tool kit, etc.

•► To open: open the tailgate.

•► To open: open the tailgate.

•► Holding the ribbing, press handle 1 downwards 2.

Handle 1 folds upwards.

•► Pull EASY-PACK folding luggagecompartment

•► Pull EASY-PACK folding luggagecompartment floor 3 in the direction of the arrow by handle 1 until it reaches the desired position and engages in side 4.

► To close: disengage the EASY-PACK folding luggage-compartment floor and pull it back.

•► Press the EASY-PACK folding luggagecompartment floor down 2 until it engages.

Installing and removing the folding luggage-compartment floor

•► Remove the combined cargo cover and net

120˚ position

120˚ position

•►  To remove: move EASY-PACK folding luggage-compartment floor 1 into the 120˚ position and lift it upwards.

•► To install: push EASY-PACK folding luggage-compartment floor 1 to the stop, move it into the 120˚ position and make sure it engages audibly.

•► Pull EASY-PACK folding luggagecompartment floor 1 forwards.

    See also:

    Deactivating/activating PARKTRONIC
    Vehicles without the Enhanced Off-Road Pro Engineering Package 1 To deactivate/activate PARKTRONIC 2 Indicator lamp Vehicles with the Enhanced Off-Road Pro Engineering Package 1 To deactivat ...

    Transmission positions
    Park position Do not shift the transmission into position P() unless the vehicle is stationary. The parking lock should not be used as a brake when parking. In addition to engaging the parking ...

    Deactivating the HOLD function
    The HOLD function is deactivated automatically if: - you accelerate and the transmission is in position D or R. - the transmission is in position P. - you apply the brakes again with a certain am ...