Deactivating DISTRONIC PLUS

There are several ways to deactivate

There are several ways to deactivate DISTRONIC PLUS:

•► Briefly press the cruise control lever forwards 1.
or
•► Brake, unless the vehicle is stationary.

When you deactivate DISTRONIC PLUS, the DISTRONIC PLUS Off message is shown in the multifunction display for approximately five seconds.

The last speed stored remains stored until you switch off the engine.

DISTRONIC PLUS is not deactivated if you depress the accelerator pedal. If you accelerate to overtake, DISTRONIC PLUS adjusts the vehicle's speed to the last speed stored after you have finished overtaking.

DISTRONIC PLUS is automatically deactivated if:

 - you apply the parking brake.
 - you are driving slower than
15 mph (25 km/h) and there is no vehicle in front, or if the vehicle in front is no longer detected.
 - ESP® intervenes or you deactivate ESP®.
 - the transmission is in the P, R or N position.
 - you switch off the radar sensor system.
 - you pull the cruise control lever towards

you in order to pull away and the frontpassenger door or one of the rear doors is open.

 - the vehicle has skidded.

If DISTRONIC PLUS is deactivated, you will hear a warning tone. The DISTRONIC PLUS Off message is shown in the multifunction display for approximately five seconds.

WARNING
The DISTRONIC PLUS switches off and releases the brakes when the vehicle decelerates below the minimum speed of 20 mph (30 km/h) by operation of the system unless the DISTRONIC PLUS detects a vehicle directly ahead of you. At that time the driver must apply the brakes in order to reduce vehicle speed further or bring it to a stop.

    See also:

    Override feature for the rear side windows
    WARNING When children ride on the vehicle's rear seats, activate the override switch. Otherwise, the children could be injured, e.g. by trapping themselves in the rear side window. ...

    Cleaning the seat belts
    ► Use clean, lukewarm water and soap solution. Do not clean the seat belts using chemical cleaning agents. Do not dry the seat belts by warming them above 176 °F (80 °C) or placing them i ...

    External authorization
    If COMAND does not detect your mobile phone, this may be due to particular security settings on your mobile phone. In this case, you can test if your mobile phone can find COMAND. The Bluetoot ...