Engaging park position P
•► Push the DIRECT SELECT lever in the direction of arrow P.
The automatic transmission shifts automatically into park position P if you open the driver's door when the vehicle is stationary or driving at very low speed, and the transmission is in position D or R. This function depends on the date of manufacture of your vehicle.
If the engine speed is too high or the vehicle is moving, do not shift the automatic transmission directly from D to R, from R to D or directly to P. The automatic transmission could otherwise be damaged.
HOLD function or DISTRONIC PLUS: the automatic transmission automatically switches to transmission position P if the vehicle is braked by the HOLD function or DISTRONIC PLUS. In addition, at least one of the following conditions must be fulfilled:
- the engine is switched off.
- the driver's door is open and the seat belt
is not in the buckle.
See also:
The mbrace system
The mbrace system provides different
services, e.g.:
• automatic and manual emergency call
• Roadside Assistance call
• MB Info call
To adjust the volume during an mbrace call,
proceed as foll ...
Switching to navigation mode
Press the function button once
or
twice.
or
Select Navi in the main function bar by
sliding and turning
the COMAND
controller and press to confirm.
In both cases, you will see ...
Opening and closing the side
windows
1 Front left
2 Front right
3 Rear right
4 Rear left
The switches for all side windows are located
on the driver's door. There is also a switch on
each door for the corresponding side windo ...