Deactivating/activating the ECO start/ stop function
Example: ECO button
If indicator lamp 2 is off, the ECO start/ stop function has been deactivated manually or as the result of a malfunction.
The engine will then not be switched off automatically when the vehicle stops.
Every time you start the engine, the ECO start/stop function is switched on and the automatic transmission shifts to automatic drive program C.
Deactivating
•► In drive program C, press button 1.
or
•► Switch to drive program S, S+ or
M.
Indicator lamp 2 on button 1 and the symbol in the multifunction display go out.
The Stop/Start active or Stop/Start inactive message disappears in the AMG menu in the multifunction display.
Activating
•► Press button 1.
Indicator lamp 2 lights up. If drive program S, S+ or M is selected, the automatic transmission switches to drive program C.
If all conditions for automatic engine switch-off are fulfilled, the symbol is shown in green in the multifunction display. In addition, the Stop/Start active display message is shown in the AMG menu in the multifunction display.
If not all conditions for automatic engine switch-off are fulfilled, the Stop/Start inactive display message and the symbol are shown in yellow in the AMG menu in the multifunction display. If this is the case, the ECO start/ stop function is not available.
See also:
Engine emergency off
If the engine cannot be switched off as
described, observe the following procedure:
► Take the fuse allocation chart out of the
vehicle tool kit.
► Search for fuse 120 in the fuse al ...
Activating/deactivating ATTENTION
ASSIST
•► Press the button on the
steering wheel to select the DriveAssist
menu.
•► Press the button to select
Attention Asst..
•► Press .
The current selection is displayed.
•& ...
EBD (electronic brake force distribution)
Observe the "Important safety notes" section ().
EBD monitors and controls the brake pressure on the rear wheels to improve driving
stability while braking.
WARNING
If EBD has m ...