SmartKey

0. To remove the SmartKey

0. To remove the SmartKey (shift the transmission to position P)
1. Power supply for some consumers, such as the windshield wipers
2. Ignition (power supply for all consumers) and drive position
3. To start the engine

If the SmartKey is in position 0 in the ignition lock for an extended period of time, it can no longer be turned in the ignition lock. The steering is then locked. To unlock, remove the SmartKey and reinsert it into the ignition lock.

The steering is locked when you remove the SmartKey from the ignition lock.

The SmartKey can be turned in the ignition lock even if it is not the correct SmartKey for the vehicle. The ignition is not switched on. The engine cannot be started.

    See also:

    Driving safety systems overview
    In this section, you will find information about the following driving safety systems: • ABS (Anti-lock Braking System) • BAS (Brake Assist System) • ESP® (Electronic Stability Program) • EBD ( ...

    Important safety notes
    WARNING In order to avoid possible loss of vehicle control, all seat, head restraint, steering wheel and rear view mirror adjustments, as well as fastening of seat belts, must be done befor ...

    Detaching and storing the cargo net
    ► Detach guide rod ; from bracket 1. ► Press the red button on the upper and lower guide rods. ► Fold the cargo net and roll it up. ► Close the two Velcro fastene ...