Opening the hood
WARNING
Do not pull the release lever while the vehicle
is in motion. Otherwise, the hood could be
forced open by passing air flow.
This could cause the hood to come loose and
injure you and/or others.
WARNING
Do not open the hood when the engine is
overheated. You could be seriously injured.
Observe the coolant temperature gauge to
determine whether the engine may be
overheated. If you see flames or smoke
coming from the engine compartment, move
away from the vehicle. Wait until the engine
has cooled. If necessary, call the fire
department.
WARNING
There is a risk of injury if the hood is open,
even if the engine is not running.
Some engine components can become very
hot.
To avoid the risk of burns, only touch those
components described in the Operator's
Manual and observe the relevant safety notes.
WARNING
To help prevent personal injury, stay clear of
moving parts when the hood is open and the
engine is running.
The radiator fan may continue to run for
approximately 30 seconds or may even
restart after the engine has been turned off.
Stay clear of fan blades.
WARNING
The engine is equipped with a transistorized
ignition system. Because of the high voltage,
it is dangerous to touch any components
(ignition coils, spark plug sockets, diagnostic
socket) of the ignition system:
• with the engine running
• while starting the engine
• when the ignition is switched on and the engine is turned manually
Make sure that the windshield
wipers are
switched off.
WARNING
The windshield wipers and wiper linkage
could be set in motion.
When the hood is open, you or others could
be injured by the wiper linkage.
Make sure that the windshield wipers are
switched off. Remove the SmartKey or make
sure that no ignition position has been
selected with KEYLESS-GO. All indicator
lamps must be off in the instrument cluster.
Pull release lever 1 for the
hood.
The hood is released.
Make sure that the windshield
wipers are
not folded away from the windshield. You
could otherwise damage the windshield
wipers or the hood.
Reach into the gap, pull hood
catch
handle 2 up and lift the hood.
Once you have lifted the hood about
15 inches (40 cm), it is automatically
opened the rest of the way and held open
by the gas-filled struts.
See also:
State-of-the-art engine technology from the inventor of the diesel passenger
car
The 2.2-litre CDI engine turns the ML 250 BlueTEC 4MATIC into the most
economical SUV in its class. With NEDC fuel consumption of 6.0 l/100 km, the
model even outperforms any hybrid model currentl ...
Checking the oil level using the oil dipstick
Park the vehicle on a level surface. To check the oil level with the engine
at operating temperature, switch the engine off and wait for approximately five
minutes.
Pull oil dipstick 1 ou ...
Useful information
This Operator's Manual describes
all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differenc ...