Loading guidelines

WARNING
Always fasten items being carried as securely as possible using fastening materials appropriate for the weight and size of the load.
In an accident, during hard braking or sudden maneuvers, loose items will be thrown around inside the vehicle. This can cause injury to vehicle occupants unless the items are securely fastened in the vehicle.
To help avoid personal injury during a collision or sudden maneuver, exercise care when transporting cargo. Do not pile luggage or cargo higher than the seat backrests.
The trunk is the preferred place to carry objects. Do not place anything on the rearwindow shelf.
Never drive a vehicle with the trunk open.

Deadly carbon monoxide (CO) gases may enter vehicle interior resulting in unconsciousness and death.

The handling characteristics of a laden vehicle are dependent on the distribution of the load within the vehicle. For this reason, you should observe the following notes when transporting a load:
• when transporting a load, never exceed the maximum permissible gross vehicle weight or the gross axle weight rating of the vehicle (including occupants). The values are specified on the vehicle identification plate on the B-pillar of the driver's door.
• position heavy loads as far forwards as possible and as low down in the trunk as possible.
• the load must not protrude above the upper edge of the seat backrests.
• always place the load against the rear or front seat backrests. Make sure that the seat backrests are securely locked into place.
• always place the load behind unoccupied seats if possible.
• secure the load with sufficiently strong and wear-resistant tie down. pad sharp edges for protection.

    See also:

    Opening/closing automatically from inside
    WARNING Maintain sight of the area around the rear of the vehicle while operating the tailgate with the door-mounted remote tailgate switch. Monitor the opening procedure carefully to make s ...

    Displaying details
    Select Data/Connections in the telephone basic menu by sliding and turning the COMAND controller and press to confirm. Select Bluetooth Telephones and press to confirm. Select the des ...

    Calling up a stored setting
    If you want to move the seat from the fully reclined position to a stored seat position, first raise the backrest. The seat could otherwise be damaged. Press and hold the relevant storage positi ...