Storing the current speed or calling up the last stored speed

WARNING
The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others.

lever towards you 4. Briefly pull the cruise control lever towards you 4.
accelerator pedal. Remove your foot from the accelerator pedal.
The first time cruise control is activated, it stores the current speed or regulates the speed of the vehicle to the previously stored speed.

    See also:

    Activating RACE START
    •► Depress the brake pedal with your left foot, and keep it depressed. •► Turn the drive program selector clockwise until the RS lamp lights up. The multifunction display shows the RAC ...

    Setting the rear-compartment airflow using the rear control panel
    Turn the SmartKey to position 2 in the ignition lock. To increase/reduce: press rocker switch 14 up or down. ...

    Low-beam headlamps
    To switch on the low-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. Turn the light switch to . The indicator lamp in the instrument cluster light ...