Defrosting the windshield
You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows.
You should only select the
defrosting
function until the windshield is clear again.
Turn the SmartKey to position
2 in the ignition lock.
To activate: press the
button.
The indicator lamp in the button
lights up.
The climate control system switches to the following functions:
• cooling with air dehumidification on
• high airflow
• high temperature
• air distribution to the windshield and front side windows
• air-recirculation mode off
To switch off: press the
button.
The indicator lamp in the button
goes
out. The previously selected settings come
into effect again. The cooling with air
dehumidification function remains on. Airrecirculation
mode remains deactivated.
or
Press the
button.
The indicator lamp in the button
goes
out. Airflow and air distribution are set to
automatic mode.
or
Turn temperature control 1 or 6
clockwise or counter-clockwise.
or
Press the
or
button.
See also:
Telescopic rod
The telescopic rod can be used to secure the
load against the rear seats to prevent it from
moving around.
– To install: insert one bracket 2 into both
the left and the right loading rails ...
Please bear the following in mind
The engine oils are matched to the
performance of Mercedes-Benz engines and
service intervals. You should therefore only
use engine oils and oil filters that are
approved for vehicles with mainten ...
EBD (electronic brake force distribution)
Observe the "Important safety notes"
section.
EBD monitors and controls the brake
pressure on the rear wheels to improve
driving stability while braking.
WARNING
If EBD has malfu ...