Setting climate control to automatic
WARNING
If you switch off the cooling function, the
vehicle will not be cooled when weather
conditions are warm. The windows can fog up
more quickly. Window fogging may impair
visibility and endanger you and others.
In automatic mode, the set temperature is maintained automatically at a constant level.
The system automatically regulates the temperature of the dispensed air, the airflow and the air distribution.
Automatic mode will achieve optimal operation if cooling with air dehumidification is also activated. If desired, cooling with air dehumidification can be deactivated.
Turn the SmartKey to position
2 in the ignition lock.
Set the desired temperature.
To activate: press the
button. The indicator lamp in the
button lights up. Automatic air
distribution and airflow are activated.
3-zone automatic climate control: when automatic mode is activated, you can select a climate mode setting.
To switch off: press the
button.
or
Press the
or
button.
The indicator lamp in the button
goes out. Automatic air distribution and airflow are deactivated.
See also:
Vehicle identification plate
Even if you have calculated the total load
carefully, you should still make sure that the
gross vehicle weight rating and the gross axle
weight rating are not exceeded. Details can
be found on ...
Search & Send
Points to observe before use
To use Search & Send, your vehicle must
be equipped with mbrace and a navigation
system. You must also have an mbrace
service subscription.
"Search & ...
Using the SmartKey
– Turn the SmartKey to position 0 in the
ignition lock and remove it.
The immobilizer is activated.
If you turn off the engine with the
SmartKey and then remove it from the
ignition lock ...