Parking lamps/standing lamps (halogen headlamps)

Parking lamps/standing lamps (halogen headlamps)
Switch off the lights.
Open the hood.
Turn housing cover 1
counter-clockwise and pull it out.
Pull out bulb holder 2.
Take the bulb out of bulb holder
2.
Insert the new bulb into bulb
holder 2.
Insert bulb holder 2.
Align housing cover 1 and turn it
clockwise until it engages.
See also:
Installing the ball coupling
WARNING
If the vehicle/trailer combination is not
secured, the trailer may come loose. As a
result, you could cause an accident.
Therefore, make sure that the ball coupling is
secured with th ...
Well-proven seat technology with a new design
Where seat development is concerned, Mercedes-Benz had added a new quality to
a well established Mercedes concept, namely padded seat piping - a sophisticated
and demanding upholstery technique th ...
Please bear the following in mind
For safety reasons, Mercedes-Benz
recommends that you only use Tires and
wheels which have been approved by
Mercedes-Benz specifically for your
vehicle.
These tires have been specially adapt ...
