Power washers

Do not use power washers with circular-jet WARNING
Do not use power washers with circular-jet nozzles (dirt grinders) to clean your vehicle, in particular the tires. You could otherwise damage the tires and cause an accident.

Always maintain a distance of at least Always maintain a distance of at least 11.8 in (30 cm) between the vehicle and the power washer nozzle. Information about the correct distance is available from the equipment manufacturer.
Move the power washer nozzle around when cleaning your vehicle.
Do not aim directly at any of the following:
- tires
- door gaps, roof gaps, joints etc.
- electrical components
- battery
- connectors
- lights
- seals
- trim elements
- ventilation slots
Damaged seals or electrical components can lead to leaks or failures.

    See also:

    Overview of interior lighting
    Front overhead control panel 1. Switches the rear interior lighting on/off 2. Switches the automatic interior lighting control on/off 3. Switches the right-hand front reading lam ...

    Lowering the vehicle
    ► Place the ratchet wrench onto the hexagon nut of the jack so that the letters AB are visible. ► Turn the ratchet wrench until the vehicle is once again standing firmly on the gro ...

    Tire tread
    WARNING Although the applicable federal motor vehicle safety laws consider a tire to be worn when the tread wear indicators (TWI) become visible at approximately 1/16 in (1.6 mm), we recomm ...