Automatic locking feature

The vehicle locks automatically when the ignition is switched on and the wheels of the vehicle are turning at a speed of more than 9 mph (15 km/h).

You could therefore be locked out when:
• the vehicle is being pushed.
• the vehicle is being towed.
• the vehicle is being tested on a dynamometer.

To deactivate: press and

hold button 1 for about five seconds until a tone sounds. To deactivate: press and hold button 1 for about five seconds until a tone sounds.
button 2 for about five seconds until a tone sounds. To activate: press and hold button 2 for about five seconds until a tone sounds.

buttons and If you press one of the two buttons and do not hear a tone, the relevant setting has already been selected.

You can also switch the automatic locking function on and off using the on-board computer.

    See also:

    Tread wear
    The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified U.S. government course. For example, a tire graded 150 would ...

    Exterior
    The GLK350 sported a luxuriously boxy exterior with huge, expressive tires that were the perfect juxtaposition of femininity and gusto. It seemed to be saying, "I could hang with a Land Rover ...

    Vehicle identification plate with vehicle identification number (VIN) and paint code number
    – Open the driver's door. You will see vehicle identification plate 1. Example: vehicle identification plate (USA only) 2 Paint code 3 VIN Example: vehicle identification plate (Canad ...