Resetting to factory settings
For safety reasons, the Daytime Running Lights: function in the Lights submenu is only reset when the vehicle is stationary.
– Press the or
button on the
steering wheel to select the Settings
menu.
– Press the or
button to select the
Factory Setting submenu.
– Press the button to confirm.
The Reset All Settings? message
appears.
– Press the or
button to select
No or Yes.
– Press the button to confirm the
selection.
If you select Yes, the multifunction display
shows a confirmation message.
See also:
Storing the current speed or calling up
a stored speed
WARNING
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising from r ...
Problems with the cooling with air
dehumidification function
If you can no longer switch on the cooling with
air dehumidification function via COMAND,
the cooling with air dehumidification function
is switched off due to a malfunction.
Consult a qualifi ...
Hill start assist
Hill start assist helps you when pulling away
forwards or in reverse on an uphill gradient.
It holds the vehicle for a short time after you
have removed your foot from the brake pedal.
This give ...