Checking the vehicle and trailer weight
- To check that the weights of the towing
vehicle and the trailer comply with the
maximum permissible values, have the
vehicle/trailer combination (including the
driver, passengers, and cargo with a fully
laden trailer) weighed on a calibrated
weighbridge.
- Check the gross axle weight rating of the
front and rear axles, the gross weight of the
trailer and trailer drawbar noseweight.
See also:
Setting the temperature in the rear
compartment using the rear control
panel
Turn the SmartKey to position 2 in the
ignition lock.
To increase/reduce: press rocker
switch 12 or 17 up or down.
Only change the temperature setting in
small increments. Start at 72 °F (22 ...
Other bulbs
There are bulbs other than the Xenon bulbs
that you cannot replace. Replace only the
bulbs listed. Have the bulbs that
you cannot replace yourself changed at a
qualified specialist workshop.
...
Setting the airflow
You can set the airflow separately for the
driver’s and front-passenger side.
Select left airflow 3 or right airflow 5 by
turning the COMAND controller and
press to confirm.
To adjust th ...