Activating/deactivating DSR
Activating
You can only activate DSR if you are driving at 25 mph (40 km/h) or slower.
– Press button 1.
Indicator lamp 2 lights up.
The following messages appear in the multifunction display and in the status indicator, for example:
If the driving speed is too fast, the DSR symbol and the Max. Speed 25 mph (Canada: 40 km/h) message appear in the multifunction display.
You cannot activate DSR if the SPORT onroad
program is activated. The DSR symbol
and the Not in Drive Program SPORT
message then appear in the multifunction
display.
Deactivating
– Press button 1.
Indicator lamp 2 goes out.
The DSR symbol appears in the
multifunction display with the Off
message.
DSR is deactivated automatically if you are driving faster than 30 mph (Canada:
45 km/h). The DSR symbol appears in the multifunction display with the Off message.
Status indicator 3 goes out. You also hear a warning.
See also:
Tire tread
WARNING
Although the applicable federal motor vehicle
safety laws consider a tire to be worn when
the tread wear indicators (TWI) become
visible at approximately 1/16 in (1.6 mm), we recomm ...
Seat belt adjustment
The seat-belt adjustment function adjusts the
driver's and front-passenger seat belt to the
upper body of the occupants.
The belt strap is tightened slightly when:
• you engage the belt tongue i ...
Exterior mirror out of position
If an exterior mirror has been pushed out of position, proceed as follows:
Vehicles without electrically folding exterior mirrors: move the exterior
mirror into the correct position manually.
...