"Reverse parking" function
– Make sure that the rear view camera is
activated and that the "Reverse parking"
function is selected. See the separate
operating instructions for COMAND.
The lane and the guide lines are shown.
Backing up straight into a parking space without turning the steering wheel
1 Vehicle width including exterior mirrors
2 White lane with steering wheel straight
3 Yellow guide line approximately 3 ft (1 m) away from the rear area
4 Red guide line approximately 10 in (0.25 m) away from the rear area
– With the help of white lane 2, check whether the vehicle will fit into the parking space.
– Using the white lane as a guide, carefully back up until you reach the end position.
Red guide line 4 is then at the end of the parking space. The vehicle is almost parallel in the parking space.
Reverse perpendicular parking with the steering wheel at an angle
– Drive past the parking space and bring the vehicle to a standstill.
Turning the steering wheel
1 Red lane indicating the route the vehicle
will take with the steering wheel in its
current position
2 Parking space marking
– While the vehicle is at a standstill, turn the
steering wheel in the direction of the
parking space until the red lane reaches
parking space marking 2.
– Keep the steering wheel in that position
and back up carefully.
Backing up with the steering wheel turned
1 Red lane indicating the route the vehicle will take with the steering wheel in its current position
– Stop the vehicle when it is almost exactly
in front of the parking space.
The white lane should be as close to parallel
with the parking space marking as
possible.
Driving to the final position
1 White lane at current steering wheel angle
2 Parking space marking
– Turn the steering wheel to the center position while the vehicle is stationary.
1 Red guide line approximately 10 in (0.25 m) away from the rear area
2 White lane with steering wheel straight
3 End of parking space
– Back up carefully until you have reached
the end position.
Red guide line 1 is then at the end of
parking space 3. The vehicle is almost
parallel in the parking space.
See also:
Switching on satellite radio mode
Notes
Important notes on registration, see
"Registering satellite radio".
Switching on satellite radio mode
Select Audio in the main function bar by
sliding and turning
the COMAND ...
Activating the HOLD function
•► Make sure that the activation conditions
are met.
•► Depress the brake pedal.
•► Quickly depress the brake pedal further
until HOLD display 1 appears in the
multifunctio ...
Functions of the number keypad
You can use the remote control to execute the same functions as the COMAND
control panel.
Mode
Function
Audio mode
Selects stations via the station presets
Sets stations ...