Important safety notes
WARNING
When leaving the vehicle, always remove the
SmartKey from the ignition lock. Always take
the SmartKey with you and lock the vehicle.
Do not leave children unsupervised in the
vehicle, even if they are secured in a child
restraint system, and do not give them access
to an unlocked vehicle. A child's unsupervised
access to a vehicle could result in an accident
and/or serious personal injury. They could:
• injure themselves on vehicle parts
• be seriously or fatally injured by extreme heat or cold
• injure themselves or have an accident with vehicle equipment that may still
be in operation even after the SmartKey has
been removed from the ignition, such as the seat adjustment, steering wheel
adjustment or memory function.
If children open a door, they could cause
severe or even fatal injury to other persons; if
they get out of the vehicle, they could injure
themselves when doing so or be seriously or
even fatally injured by any passing traffic.
Do not expose the child restraint system to
direct sunlight. The child restraint system's
metal parts, for example, could become very
hot, and a child could be burned on these
parts.
WARNING
If a key ring is too heavy or too large, the
weight acting on the SmartKey could cause it
to turn in the ignition lock or catch on the
steering wheel. This could cause the engine
to be switched off suddenly. You could lose
control of the vehicle and cause an accident.
Do not attach any heavy or large key rings to
the SmartKey that is inserted in the ignition.
See also:
Control panel for dual-zone automatic climate control
Canada only
1. To activate/deactivate air-recirculation mode
2. To defrost the windshield
3. To switch the ZONE function on/off
4. Display
5. To set climate control to automatic
...
Downhill gradients
On long and steep gradients, you must
reduce the load on the brakes by shifting
early to a lower gear. This allows you to take
advantage of the engine braking effect and
helps avoid overheatin ...
Socket in the front-compartment center console
To open: slide cover 1 forwards until it engages.
Lift up the cover of socket 2.
To close: press cover 1 briefly at the front. The cover moves back.
...