Releasing automatically

Your vehicle's electric parking brake is automatically released if all of the following conditions are met:
- the engine is running.
- the transmission is in position D or R.
- the seat belt has been fastened.
- you depress the accelerator pedal.

If the transmission is in position R, the trunk lid must be closed.

If your seat belt is not fastened, the following conditions must be fulfilled to automatically release the electric parking brake:
- the driver's door is closed.
- you have shifted out of transmission position P or you have previously driven faster than 2 mph (3 km/h).

    See also:

    Notes on driving
    • If the vehicle is heavily laden, check the tire pressures and correct them if necessary. • When parking your vehicle, make sure that the tires do not get deformed by the curb or other obstacle ...

    Inserting the brackets into the loading rail
    – Insert bracket 1 into the center of loading rail 4. – Press release button 2 and push bracket 1 into the desired position in loading rail 4. – Let go of release button 2. – Press lockin ...

    Redialing
    The on-board computer saves the last names or numbers dialed in the redial memory. Press the or button on the steering wheel to select the Tel menu. Press the button to switch to the ...