Defrosting the windshield

You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows.

You should only select the defrosting You should only select the defrosting function until the windshield is clear again.

- Turn the SmartKey to position 2 in the ignition lock.
- To activate: press the The indicator lamp in the  button button.
The indicator lamp in the lights button lights up.
The climate control system switches to the following functions:
    - cooling with air dehumidification on
    - high airflow
    - high temperature
    - air distribution to the windshield and front side windows
    - air-recirculation mode off

- To switch off: press the button. button.

The indicator lamp in the goes button goes out. The previously selected settings come into effect again. The cooling with air dehumidification function remains on. Airrecirculation mode remains deactivated.
or
- Press the The indicator lamp in the  button button.
The indicator lamp in the goes button goes out. Airflow and air distribution are set to automatic mode.
or
- Turn controls 1 or 6 clockwise or counter-clockwise.
or
- Press the button. or Switching maximum cooling MAX button.

    See also:

    Activating the rear view camera
    Make sure that the SmartKey is in position 2 in the ignition lock. Make sure that the "rear view camera" function is selected in COMAND (see the separate operating instructions for C ...

    Recommended tire pressure
    The recommended tire pressure applies to the tires mounted at the factory. The Tire and Loading Information placard contains the recommended tire pressures for cold tires on a fully loaded vehi ...

    Calling up a stored parking position setting
    Turn the SmartKey to position 2 in the ignition lock. Adjust the exterior mirror on the frontpassenger side with the corresponding button. Engage reverse gear. The exterior mirror on t ...