3-zone automatic climate control
Automatic climate control zones
You can select different temperature settings for the driver's and front-passenger sides as well as for the rear compartment.
- Turn the SmartKey to position 2 in the
ignition lock.
- To increase/reduce the temperature in
the front: turn controls 1 and 6 clockwise or counterclockwise.
Only change the temperature setting in
small increments. Start at 72 °F (22
°C).
- To increase/reduce the temperature in
the rear compartment using the front
control panel: press the button.
The indicator lamp in the button
goes
out.
- Turn control 1 clockwise or
counterclockwise.
Only change the temperature setting in
small increments. Start at 72 °F (22
°C ).
The temperature setting for the driver's
side is adopted for the rear compartment
and the front-passenger side.
- To increase/decrease the rear
compartment temperature using the
rear control panel: turn control 17 on the
rear control panel clockwise or
counterclockwise.
Only change the temperature setting in
small increments. Start at 72 °F (22
°C ).
See also:
Important safety notes
WARNING
If you tow the vehicle, you must use a rigid towing bar if:
the engine is not running.
there is a brake system malfunction.
there is a malfunction in the power supply or the vehi ...
Notes on technical data
The data stated here specifically refers to
a vehicle with standard equipment. Consult
an authorized Mercedes-Benz Center for
the data for all vehicle variants and trim
levels. ...
Important safety notes
WARNING
When leaving the vehicle, always remove the
SmartKey from the ignition lock. Always take
the SmartKey with you and lock the vehicle.
Do not leave children unattended in the
vehicle, ...