Hazard warning lamps
The hazard warning lamps automatically
switch on if:
- an air bag is deployed.
- the vehicle is slowed down severely from a
speed of over 45 mph(70 km/h) and comes
to a halt.
- To switch on the hazard warning lamps:
press button 1.
All turn signals flash. If you now switch on
a turn signal using the combination switch,
only the turn signal lamp on the
corresponding side of the vehicle will flash.
- To switch off the hazard warning
lamps: press button 1.
The hazard warning lamps are deactivated
automatically if the vehicle returns to a speed
of over 6 mph(10 km/h) after a full
application of the brakes.
The hazard warning lamps still
operate if
the ignition is switched off.
See also:
Step-by-step instructions
The following steps have been developed as required of all manufacturers under
Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the "National Traffic
and Motor Vehicle Safety ...
On-board diagnostic interface
WARNING
If you connect equipment to the on-board
diagnostics interface, it can affect the
operation of the vehicle systems. This can
impair the operating safety of your vehicle
while driving ...
Applying/releasing manually
To apply: press handle 1.
The red (USA only) or
(Canada
only) indicator lamp in the instrument
cluster lights up.
The electric parking brake can also be
applied when the SmartKey is remov ...