Resetting the side windows
If a side window can no longer be closed fully,
you must reset it.
- Close all the doors.
- Turn the SmartKey to position 1 or 2 in the
ignition lock.
- Pull the corresponding switch on the door
control panel until the side window is
completely closed.
- Hold the switch for an additional second.
If the side window opens again slightly:
- Immediately pull the corresponding switch
on the door control panel until the side
window is completely closed.
- Hold the switch for an additional second.
- If the corresponding side window remains
closed after the button has been released,
the side window has been reset correctly.
If this is not the case, repeat the steps
above again.
See also:
Please bear the following in mind
At the onset of winter, have your vehicle
winterproofed at a qualified specialist
workshop, e.g. at an authorized Mercedes-Benz Center.
Observe the notes in the "Changing a wheel"
sec ...
Interior
The G500’s leather upholstery is complemented by burl walnut interior trim.
Standard equipment includes power windows and door locks, heated power seats, a
GPS navigation system and Mercedes-Benz' ...
Restoring the factory settings
Press the
and
buttons simultaneously for
approximately six seconds until the battery check lamp flashes twice. ...