Closing

Monitor the closing procedure carefully to WARNING
Monitor the closing procedure carefully to make sure no one is in danger of being injured. To prevent possible personal injury, always keep hands and fingers away from the cargo compartment opening when closing the tailgate. Be especially careful when small children are around. To stop the closing procedure, do one of the following:

RPress or pull the remote tailgate opening/ closing switch on the driver's door.

RPress the tailgate closing switch.

RPress the KEYLESS-GO locking/closing switch.

RPull outside handle on the tailgate.

RWhen no SmartKey is inserted in the starter switch (vehicles with KEYLESS-GO: Make sure the vehicle's on-board electronics have status 0): Press button on the on the SmartKey.

You can close the tailgate automatically using the SmartKey, the closing button or the locking button.

Closing button and locking button (example:

Closing button and locking button (example:

vehicle with the EASY-PACK tailgate and KEYLESS-GO)

- To close: press closing button 1 on the tailgate.
or
- Press and hold the button on the button on the SmartKey until the tailgate closes.
- To close and lock simultaneously:
Press locking button 2 on the tailgate.

locking the Simultaneously closing and locking the tailgate is only possible if all doors are shut and the SmartKey is located in the vicinity of the tailgate.

and The tailgate can only be opened and closed with the SmartKey if there is no SmartKey in the ignition lock.
If the tailgate touches an object while closing, the closing procedure is interrupted and the tailgate reopens.

the If you leave a KEYLESS-GO key in the cargo compartment, the tailgate will not lock.
The tailgate is not closed unless a KEYLESS-GO key is detected.

    See also:

    Checking tire pressure electronically
    – Make sure that the SmartKey is in position 2 in the ignition lock. – Press the or button on the steering wheel to select the Serv. menu. – Press the or button to select Tire Pressure. ...

    Tire pressure of 180 kPa (1.8 bar/ 26 psi) is reached
    – Switch off the tire inflation compressor. – Unscrew the filler hose from the valve of the faulty tire. After use, excess TIREFIT may run out of the filler hose. This could cause stains. ...

    Example: step 1 to 3
    The following table shows examples on how to calculate total and cargo load capacities with varying seating configurations and number and size of occupants. The following examples use a load lim ...