Seat belt adjustment
The seat-belt adjustment function adjusts the driver's and front-passenger seat belt to the upper body of the occupants.
The belt strap is tightened slightly when:
- you engage the belt tongue in the belt
buckle and you then turn the SmartKey to
position 2 in the ignition lock.
- the SmartKey is in position 2 in the ignition
lock and you then engage the belt tongue
in the buckle.
The seat-belt adjustment will apply a retraction force if any slack is detected between the occupant and the seat belt. Do not hold on to the seat belt tightly while it is adjusting. You can switch the seat-belt adjustment on and off in the on-board computer.
The seat-belt adjustment is an integral part of the PRE-SAFE® convenience function. More information about PRE-SAFE® can be found in the "PRE-SAFE® (preventative occupant protection)" section.
See also:
Dialing a number from the phone book
If your mobile phone is able to receive calls,
you can search for and dial a number from the
phone book in COMAND at any time.
– Press the or
button on the
steering wheel to select the Tel m ...
Seat belt
Problem
Possible causes/consequences and
Solutions
After
starting the
engine, the red seat
belt warning lamp lights
up for six seconds.
The seat belt warning ...
ATA (Anti-Theft Alarm system)
A visual and audible alarm is triggered if the
alarm system is armed and you open:
- a door
- the vehicle with the mechanical key
- the trunk lid/tailgate
- the hood
The alarm is not s ...