Important safety notes
The HomeLink® garage door opener integrated in the rear-view mirror allows you to operate up to three different door and gate systems.
Certain garage door drives are incompatible with the integrated garage door opener. If you have difficulty programming the integrated garage door opener, contact an authorized Mercedes- Benz Center or call one of the following telephone hotlines:
• USA: Mercedes-Benz Customer
Assistance Center at•
1-800-FOR-MERCedes
• Canada: Customer Service at• 1-800-387-0100
WARNING
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent
potential harm or damage. When
programming a garage door opener, the door
moves up or down. When programming a gate
operator, the gate opens or closes.
Do not use the integrated remote control with
any garage door opener that lacks safety stop
and reverse features as required by U.S. federal safety standards (this includes
any
garage door opener model manufactured
before April 1, 1982). A garage door that
cannot detect an object - signaling the door
to stop and reverse - does not meet current
U.S. federal safety standards.
When programming a garage door opener,
park vehicle outside the garage.
Do not run the engine while programming the
integrated remote control. Inhalation of
exhaust gas is hazardous to your health. All
exhaust gas contains carbon monoxide (CO),
and inhaling it can cause unconsciousness
and possible death. All exhaust gas contains
carbon monoxide (CO), and inhaling it can
cause unconsciousness and possible death.
USA only:
This device complies with Part 15 of the FCC requirements. Operation is subject to the following two conditions:
1. This device must not cause harmful interference, and 2. this device must withstand any interference received, including interference that may cause undesired operation.
Any unauthorized modification to this device could void the user's authority to operate the equipment.
Canada only:
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
1. This device must not cause harmful interference, and 2. this device must withstand any interference received, including interference that may cause undesired operation.
Any unauthorized modification to this device could void the user's authority to operate the equipment.
See also:
Example: step 1 to 3
The following table shows examples on how to calculate total and cargo load
capacities with
varying seating configurations and number and size of occupants. The following
examples use
a load l ...
Headlamps fogged up on the inside
The headlamps may fog up on the inside if
there is high atmospheric humidity.
Drive with the headlamps switched on.
The level of moisture diminishes,
depending on the length of the journey and ...
How the occupant classification
system works
The Occupant Classification System (OCS)
categorizes the occupant on the frontpassenger
seat by means of a weight sensor.
The front-passenger front air bag is
deactivated automatically for cert ...