Setting a speed
WARNING
Keep in mind that it may take a brief moment
until the vehicle has made the necessary
adjustments.
Increase or decrease the set vehicle speed to
a value that the prevailing road conditions and
legal speed limits permit. Otherwise, sudden
and unexpected acceleration or deceleration
of the vehicle could cause an accident and/or serious injury to you and others.
► Press the cruise control lever to the
pressure point, up 1 for a higher speed or
down 2 for a lower speed.
► Keep the cruise control lever pressed
until
the desired speed is reached.
► Release the cruise control lever.
The new speed is stored.
Cruise control is not deactivated if you
depress the accelerator pedal. For example, if you accelerate briefly to
overtake, cruise control adjusts the
vehicle's speed to the last speed stored
after you have finished overtaking.
See also:
Preparing the vehicle
Stop the vehicle as far away as possible from traffic on solid, non-slippery
and level ground.
Switch on the hazard warning lamps.
Firmly depress the parking brake.
Bring the front wheels ...
Cleaning the exhaust tail pipes
Impurities combined with the effects of road
grit and corrosive environmental factors may
cause flash rust to form on the surface. You
can restore the original shine of the exhaust
tail pipe b ...
Checklist before driving off-road
► Engine oil level: check the engine oil
and
top it up if necessary.
The vehicle can only guarantee a smooth
supply of oil on steep stretches if there is a
sufficient level of engine oil ...
