Slippery road surfaces
WARNING
The outside temperature indicator is not
designed to serve as an ice-warning device
and is therefore unsuitable for that purpose.
Indicated temperatures just above the
freezing point do not guarantee that the road
surface is free of ice. The road may still be icy,
especially in wooded areas or on bridges.
WARNING
On slippery road surfaces, never downshift in
order to obtain braking action. This could
result in drive wheel slip and reduced vehicle
control. Your vehicle's ABS will not prevent
this type of control loss.
Do not engage the transfer case in position
LOW when driving on ice or packed snow. At
speeds below 18 mph (30 km/h) vehicle
steering is adversely affected by the Off-road
ABS.
Drive particularly carefully on slippery road surfaces. Avoid sudden acceleration, steering and braking maneuvers. Do not use cruise control.
If the vehicle threatens to skid or cannot be stopped when moving at low speed:
► Shift the transmission to position N.
For more information on driving with
snow chains, see.
WARNING
Make sure that you do not endanger other
road users when you apply the brakes.
See also:
Cleaning the rear view camera
Cleaning the rear view camera
Use clear water and a soft cloth to clean
camera lens 1.
Do not clean the camera lens and
the area
around the rear view camera with a power
washer. ...
Automatic engine start
The engine is started automatically if you:
• release the brake pedal when HOLD is not
activated and the transmission is in
position D or N
• shift the transmission to position R
• depres ...
Cruise control lever
To switch on or to increase the speed
To switch on or to reduce the speed
To deactivate cruise control
To switch on with the current speed or with the last stored speed
When you activate ...