Activating/deactivating climatecontrol
Important information
WARNING
When the climate control system is
deactivated, the outside air supply and
circulation are also deactivated. Only choose
this setting for a short time. Otherwise the
windows could fog up, impairing visibility and
endangering you and others.
Switch on climate control primarily using the button.
Switching the front climate control on/off using the front control panel
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on: press the
button.
The indicator lamp in the button
lights
up. Airflow and air distribution are set to
automatic mode.
or
► Press the
button.
The indicator lamp in the button goes out. The previously selected settings come into effect again.
► To switch off: press the button.
The indicator lamp in the button lights up.
Switching the rear-compartment climate control on/off using the front control panel
2-zone automatic climate control
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on/off: press the
button.
The indicator lamp in the button lights up or goes out.
3-zone automatic climate control
USA only:
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on/off: press the
button.
The indicator lamp in the button lights up or goes out.
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on: press the
button.
ON and MODE are shown in the automatic climate control display behind the symbol. The MODE display goes out after three seconds. The display switches back to the standard display.
► To switch off: press the
button.
MODE is shown in the display behind the
symbol.
► Press button
.
OFF is shown in the display behind the symbol.
Switching the rear-compartment climate control on/off using the rear control panel
3-zone automatic climate control
► Turn the SmartKey to position 2 in the
ignition lock.
► Switch on automatic climate control using
the front control panel.
► To switch on: press the
button.
The indicator lamp in the button lights up.
► To switch off: press the button.
The indicator lamp in the button lights up.
See also:
Transmission positions
Park position
Do not shift the transmission into
position P() unless the
vehicle is stationary. The parking
lock should not be used as a brake
when parking. In addition to
engaging the parking ...
Notes
The vehicle tool kit can be found in the
stowage well under the cargo compartment
floor.
Vehicles are not equipped with the tools
needed to change a wheel when they leave
the factory, e.g. jac ...
High-beam flasher
► To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
► Pull the combination switch in the
direction
of arrow 3. ...