Problems with the windshield wipers

The windshield wipers are obstructed

Leaves or snow, for example, may be obstructing the windshield wiper movement.

The wiper motor has been deactivated.

► For safety reasons, you should remove the SmartKey from the ignition lock.
or
► Switch off the engine using the Start/Stop button and open the driver's door.
► Remove the cause of the obstruction.
► Switch the windshield wipers back on.

The windshield wipers are inoperative

The windshield wiper drive is malfunctioning.

► Select another wiper speed on the combination switch.
► Have the windshield wipers checked at a qualified specialist workshop.

The spray nozzles are misaligned

The windshield washer fluid from the spray nozzles no longer hits the center of the windshield. The spray nozzles are misaligned.

► Have the spray nozzles adjusted at a qualified specialist workshop.

    See also:

    Opening
    Switch off the engine. Remove the SmartKey from the ignition lock. KEYLESS-GO: open the driver’s door. This switches the ignition to position 0, which corresponds to having removed the Sma ...

    Setting the center air vents
    1 Center air vent, left 2 Center air vent, right 3 Center vent thumbwheel, right 4 Center vent thumbwheel, left - To open/close: turn thumbwheels 3 and 4 to the right or left. ...

    Daytime running lamps
    Daytime running lamps in Canada The daytime running lamps function is required by law in Canada. It cannot therefore be deactivated. •► Turn the light switch to or . With the engine run ...