Replacing the rear window wiper blade

Removing the wiper blade

► Remove the SmartKey from the ignition

► Remove the SmartKey from the ignition lock.
► Fold wiper arm 1 away from the rear window until it engages.
► Position wiper blade 2 at a right angle to wiper arm 1.
► Hold wiper arm 1 and press wiper blade 2 in the direction of the arrow until it releases.
► Remove wiper blade 2.

Installing the wiper blade

► Place new wiper blade 2 onto wiper arm 1.
► Hold wiper arm 1 and press wiper blade 2 in the opposite direction to the arrow until it engages.
► Make sure that wiper blade 2 is seated correctly.
► Position wiper blade 2 parallel to wiper arm 1.
► Fold wiper arm 1 back onto the rear window.

    See also:

    Cornering light function
    Cornering light function The cornering light function improves the illumination of the road over a wide angle in the direction you are turning, enabling better visibility in tight bends, for ...

    Removing/attaching the washer fluid reservoir
    You must remove the washer fluid reservoir from the engine compartment before you can replace the bulbs in the left-hand headlamp. To detach: turn catch 2 counterclockwise. Swing washer flui ...

    Problems with the steering wheel heating
    If steering wheel heating indicator lamp 3 is flashing, the steering wheel heating has switched off automatically. The vehicle's electrical system voltage is too low because too many electrica ...