Switching the windshield wipers on/off
WARNING
Wiper blades are components that are subject
to wear and tear. Replace the wiper blades
twice a year, preferably in the spring and fall.
Otherwise the windows will not be wiped
properly. As a result, you may not be able to
observe surrounding traffic conditions and
could cause an accident.
Do not operate the windshield wipers when the windshield is dry, as this could damage the wiper blades. Moreover, dust that has collected on the windshield can scratch the glass if wiping takes place when the windshield is dry.
If the windshield wipers leave smears on the windshield after the vehicle has been washed in an automatic car wash, wax or other residues may be the reason for this.
Clean the windshield using washer fluid after washing the vehicle in an automatic car wash.
Combination switch
1 Windshield wipers off
2 Intermittent wipe, low11
3 Intermittent wipe, high12
4 Continuous wipe, slow
5 Continuous wipe, fast
6 Single wipe/
To wipe the
windshield using washer fluid
► Switch on the ignition.
► Turn the combination switch to the
corresponding position.
Intermittent wiping with rain sensor: due to optical influences and the windshield becoming dirty in dry weather conditions, the windshield wipers may be activated inadvertently. This could then damage the windshield wiper blades or scratch the windshield.
For this reason, you should always switch off the windshield wipers in dry weather.
In the or position, the appropriate wiping frequency is set automatically according to the intensity of the rain. In the position, the rain sensor is more sensitive than in the position, causing the windshield wipers to wipe more frequently.
See also:
Rear seat head restraints
WARNING
For safety reasons, always drive with the rear
head restraints in the upright position when
the rear seats are occupied.
Keep the area around head restraints clear of
articles (e.g ...
High-beam flasher
To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
Pull the combination switch in the direction
of arrow 3. ...
Switching on Night View Assist Plus
Depending on your vehicle's date of
manufacture, the or
symbol for
the "Automatic driving lights/daytime
running lamps" position is located on the light
switch.
You can only ac ...