License plate lamps

► Switch off the lights.

Switch off the lights.
Open the tailgate.
Remove screws 1.
Remove the license plate lamp.
Replace the bulb.
Insert the license plate lamp.
Replace and tighten screws 1.

    See also:

    Important information
    The cooling with air dehumidification function is only available when the engine is running. The air inside the vehicle is cooled and dehumidified according to the temperature selected. WARNI ...

    Headlamps fogged up on the inside
    The headlamps may fog up on the inside if there is high atmospheric humidity. Drive with the headlamps switched on. The level of moisture diminishes, depending on the length of the journey and ...

    Replacing the windshield wiper blades
    Removing the wiper blades ► Remove the SmartKey from the ignition lock. ► Fold the wiper arm away from the windshield. ► Press both release clips 2. ► Fold wiper blade ...