Position of the steering wheel fordriving

The steering wheel is moved to the last selected position when:

• the driver's door is closed.
• you insert the SmartKey into the ignition lock.
or
• you press the Start/Stop button once on vehicles with KEYLESS-GO.

When you close the driver's door with the ignition switched on, the steering wheel is also automatically moved to the previously set position.

The last position of the steering wheel is stored when you switch off the ignition or when you store the setting with the memory function.

    See also:

    Notes for 4MATIC vehicles
    Vehicles with 4MATIC must not be towed with either the front or the rear axle raised, as doing so will damage the transmission. If the vehicle has transmission damage or damage to the fron ...

    Snow chains
    For safety reasons, Mercedes-Benz recommends that you only use snow chains which have been specially approved for your vehicle by Mercedes-Benz, or are of a corresponding standard of quality. ...

    Cruise control lever
    1 To activate or increase speed 2 To activate or reduce speed 3 To deactivate DISTRONIC PLUS 4 To activate at the current speed/last stored speed 5 To set the specified minimum distance ...