Opening and closing the hinged sidewindows
The hinged side windows are operated electrically from the from the driver's seat.
WARNING 
Make sure that nobody can become trapped
as you close the hinged side windows. If there
is a risk of somebody becoming trapped,
release the switch or push the switch again to
reopen the side window.
Door control panel
► Make sure that the SmartKey is in
position
1 or 2 in the ignition lock.
► To open fully: press switch : and
release.
► To close fully: pull switch : and
release.
► To stop the closing procedure: press
switch : again.
Both hinged side windows open fully.
If the hinged side windows are blocked
when closing, the closing procedure is
terminated and the hinged side windows
open again slightly.
For safety reasons, the hinged side
windows can only be opened again after
four seconds.
See also:
High-beam flasher
To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
Pull the combination switch in the direction
of arrow 3. ...
Deactivating the HOLD function
The HOLD function is deactivated
automatically if:
- you accelerate and the transmission is in
position D or R.
- you shift the transmission to position P.
- you apply t ...
Calling up a stored setting
If you want to move the seat from the fully reclined position to a stored seat
position, first raise the backrest. The seat could otherwise be damaged.
Press and hold the relevant storage positi ...