Matte finish care
If your vehicle has a clear matte finish, observe the following instructions in order to avoid damage to the paintwork due to incorrect care.
These notes also apply to light alloy wheels with a clear matte finish.
Never polish the vehicle or the light alloy wheels. Polishing causes the finish to shine.
The following may cause the paint to become shiny and thus reduce the matte effect:
- Vigorous rubbing with unsuitable materials.
- Frequent use of car washes.
- Washing the vehicle in direct sunlight.
Never use paint cleaner, buffing or polishing products, or gloss preserver, e.g. wax. These products are only suitable for high-gloss surfaces. Their use on vehicles with matte finish leads to considerable surface damage (shiny, spotted areas).
Always have paintwork repairs performed at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.
Do not use wash programs with a hot wax treatment under any circumstances.
The vehicle should preferably be washed by hand using a soft sponge, car shampoo and plenty of water.
Use only insect remover and car shampoo from the range of recommended and approved Mercedes-Benz care products.
See also:
Cigarette lighter
WARNING
When leaving the vehicle, always remove the
SmartKey from the ignition lock. Always take
the SmartKey with you and lock the vehicle.
Do not leave children unattended in the
vehicle, ...
General notes
AIRMATIC enables a suspension tuning
setting to be selected and regulates the
damping behavior and level of your vehicle.
The system comprises a minimum of two
components: ADS (Adaptive Damping ...
Storing the current speed or calling up
the last stored speed
WARNING
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising from ...