Clearing the memory of the integrated garage door opener on the rear-view mirror
X Turn the SmartKey to position 2 in the ignition lock.
X Press and hold transmitter buttons 2 and 4 for approximately 20 seconds until indicator lamp 1 flashes rapidly. The memory is cleared.
You should clear the remote control memory before selling the vehicle.
See also:
Notes on selecting, mounting and
replacing tires
• Only mount tires and wheels of the same
type and make.
• Only mount tires of the correct size onto
the wheels.
• After mounting new tires, run them in at
moderate speeds for the first 60 ...
Making adjustments in 1 mph (Canada:1 km/h) increments
► Briefly press the cruise control lever
to the
pressure point, up 1 for a higher speed or
down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
Starting procedure with the SmartKey
To start the engine using the
SmartKey
instead of KEYLESS-GO, pull the Start/Stop button out of the ignition lock.
Turn the SmartKey to position 3
in the
ignition lock and release it as
so ...