System self-test

After you have switched on the ignition, the system carries out a self-diagnosis.

WARNING WARNING

A malfunction in the system has been detected if one of the following conditions occurs:

  • the indicator lamp in the SOS button does not light up during the system self-diagnosis.
  • the indicator lamp in the Roadside Assistance button does not light up during the system self-diagnosis. Roadside Assistance button does not light up during the system self-diagnosis.
  • The indicator lamp in the information button does not light up during self-diagnosis of the system. information button does not light up during self-diagnosis of the system.
  • the indicator lamp in the SOS button, information button continues to Roadside Assistance button or be lit red after the system self-diagnosis. information button continues to be lit red after the system self-diagnosis.
  • The Tele Aid Inoperative or Tele Aid Not Activated message appears in the multifunction display after the system selftest.

If a malfunction is indicated as outlined above, the system may not operate as expected. In the event of an emergency, assistance must be summoned by other means.

Have the system checked at the nearest authorized Mercedes-Benz Center or contact the following service hotlines:

  • USA: Mercedes-Benz Customer Assistance Center under
    1-800-FOR-MERCedes(1-800-367-6372) or 1-888-990-9007
  • Canada: Customer Service at 1-888-923-8367
    See also:

    Transmission positions
    Park position Do not shift the transmission into position P() unless the vehicle is stationary. The parking lock should not be used as a brake when parking. In addition to engaging the parking lo ...

    Remote vehicle locking
    If you forget to lock your vehicle but are no longer in the vicinity of the vehicle, it can be locked for you by the Mercedes-Benz Customer Assistance Center. The vehicle can be locked remotely ...

    Checking the coolant level
    Only check the coolant level when the vehicle is on a level surface and the engine has cooled down. Turn the SmartKey to position 2 () in the ignition lock. On vehicles with KEYLESS-GO, press ...