Folding the rear seat backrest back
- : Backrest
- ; Lock verification indicator
- = Backrest release handle
- Move the driver's or front-passenger seat forward if necessary.
Make sure that the seat belt does not become trapped when folding the rear seat backrest back. Otherwise, it could be damaged.
- Fold seat backrest 1 back until it engages. Red lock status indicator 2 is no longer visible.
WARNING
If a red indicator is visible with the seat backrest up, then the seat backrest is not properly locked into position.
Always lock seat backrest in its upright position when rear seat bench is occupied, or the expanded cargo volume is not in use. Check for secure locking by pushing and pulling on the seat backrest.
In an accident, during hard braking or sudden maneuvers, loose items will be thrown around inside the vehicle. This can cause injury to vehicle occupants unless the items are securely fastened in the vehicle.
To help avoid personal injury during a collision or sudden maneuver, exercise care when transporting cargo.
- Adjust the head restraints if necessary ().
- Move the driver's or front-passenger seat back if necessary.
See also:
Cleaning the display
Before cleaning the display, make sure that it is switched off and has
cooled down.
Clean the display surface using a commercially-available microfiber cloth
and TFT/LCD display cleaner.
...
Deactivating/activating PARKTRONIC
1 Indicator lamp
2 To deactivate/activate PARKTRONIC
If indicator lamp 1 lights up, PARKTRONIC is
deactivated. Active Park Assist is then also
deactivated.
PARKTRONIC is automatically ac ...
Storing the current speed or calling up
the last stored speed
WARNING
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising from ...