Convenience
Activating/deactivating the EASYENTRY/ EXIT feature
You can use the Easy Entry/Exit: function to activate or deactivate the EASY ENTRY/ EXIT feature ().
WARNING
You must make sure no one can become trapped or injured by the moving steering wheel when the easy-entry/exit feature is activated.
To stop steering wheel movement, move steering wheel adjustment lever or press one of the memory position buttons.
Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Children could open the driver's door and unintentionally activate the easy-entry/exit feature, which could result in an accident and/or serious personal injury.
- Press the
or
button on the steering wheel to select the Settings menu.
- Press the
or
button to select the Convenience submenu.
- Press the
button to confirm.
- Press the
or
button to select the Easy Entry/Exit function. You will see the selected setting: Enabled or Disabled.
- Press the
button to save the setting.
Switching the Fold in mirrors when locking function on/off
This function is only available in Canada.
If you switch on the Fold Mirrors in when Locking function, the exterior mirrors fold in when you lock the vehicle. If you unlock the vehicle and then open the driver's or frontpassenger door, the exterior mirrors fold out again.
If you have switched the function on and you fold the exterior mirrors in using the button on the door (), they will not fold out automatically. The exterior mirrors can then only be folded out using the button on the door.
- Press the
or
button on the steering wheel to select the Settings menu.
- Press the
or
button to select the Convenience submenu.
- Press the
button to confirm.
- Press the
or
to select the Fold Mirrors in when Locking: function. You will see the selected setting: Enabled or Disabled.
- Press the
button to save the setting.
See also:
Restricting the shift range
Pull the left-hand steering wheel paddle
shifter.
The automatic transmission shifts down
one gear and restricts the shift range to the
relevant gear.
If the engine exceeds the maximum
engi ...
Cross bar
Points to observe before use
The maximum roof load that can be used with
additional accessories decreases by the dead
weight of the crossbars (13.7 lbs/6.2 kg).
Note that installing the crossb ...
Resetting values
You can reset the values of the following
functions:
- Trip odometer
- Trip computer "From start"
- Trip computer "From reset"
•► Press the butt ...