Lights
Switching the daytime running lamps on/ off
This function is not available in Canada. If you have activated the Daytime Running Lights: function and the light switch is in the c or à position, the daytime running lamps are switched on automatically during the day when the engine is running. In the dark, the following also light up:
- the low-beam headlamps
- the parking lamps
- the tail lamps
- the license plate lamp
- the side marker lamps
- Press the
or
button on the steering wheel to select the Settings menu.
- Press the
or
button to select the Lights submenu.
- Press the
button to confirm.
- Press the
or
button to select the Daytime Running Lights: function. You will see the selected setting: Enabled or Disabled.
- Press the
button to save the setting.
Activating/deactivating surround lighting and exterior lighting delayed switch-off
If you have activated the Lighting: function and the light switch is in the
or
position, the following functions are
active when it is dark:
- Surround lighting: the exterior lighting remains lit for 40 seconds after unlocking with the key. The exterior lighting switches off when you open the driver's door.
- Exterior lighting delayed switch-off: the exterior lighting remains lit for 60 seconds after the engine has been switched off. If you close all the doors, the exterior lighting goes off after 15 seconds.
If you activate the Lighting: function, the following light up depending on the vehicle's equipment:
- the parking lamps
- the fog lamps
- the low-beam headlamps
- the daytime running lamps
- the side marker lamps
- Press the
or
button on the steering wheel to select the Settings menu.
- Press the
or
button to select the Lights submenu.
- Press the a button to confirm.
- Press the
or
button to select the Locator Lighting: function. You will see the selected setting: Enabled or Disabled.
- Press the
button to save the setting. Deactivating delayed switch-off of the exterior lighting temporarily:
- Before leaving the vehicle, turn the SmartKey to position 0 in the ignition lock.
- Turn the SmartKey to position 2 in the ignition lock and back to position 0. The exterior lighting delayed switch-off is deactivated.
Delayed switch-off of the exterior lighting is reactivated the next time you start the engine.
Activating/deactivating the interior lighting delayed switch-off
If you activate the Interior Lighting Delay function, the interior lighting remains on for 20 seconds after you remove the SmartKey from the ignition lock.
- Press the
or
button on the steering wheel to select the Settings menu.
- Press the
or
button to select the Lights submenu.
- Press the
button to confirm.
- Press the
or
button to select the Interior Lighting Delay: function. You will see the selected setting: Enabled or Disabled.
- Press the
button to save the setting.
See also:
Opening and closing the side windows
Opening and closing the side windows
1 Front left
2 Front right
3 Rear right
4 Rear left
The switches for all side windows are located
on the driver's door. There is also a switch on
each d ...
Accepting a call
If someone calls you when you are in the Tel menu, a display message appears
in the multifunction display, for example:
Press the button on the steering
wheel to accept an incoming call.
If y ...
Defrosting the windshield
You can use this function to defrost the
windshield or to defrost the inside of the
windshield and the side windows.
You should only select the defrosting
function until the windshield is clea ...