Storing and maintaining the current speed
You can store the current speed if you are driving faster than 20 mph (30 km/h).
- Accelerate the vehicle to the desired speed.
- Briefly press the cruise control lever up 1 or down 2.
- Remove your foot from the accelerator pedal.
Cruise control is activated. The vehicle automatically maintains the speed.
Cruise control may be unable to maintain the stored speed on uphill gradients.
The stored speed is resumed when the gradient evens out. Cruise control maintains
the stored speed on downhill gradients by automatically applying the brakes.
See also:
Trip computer "From start" or "From reset"
The values in the From start submenu are calculated from the start of a journey,
while the values in the From Reset submenu are calculated from the last time the
submenu was reset ().
Press th ...
Making adjustments in 1 mph (Canada: 1 km/h) increments
Briefly press the cruise control
lever to the
pressure point, up 1 for a higher speed or
down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
Cargo tie-down rings
Observe the following notes on securing
loads:
• secure the load using the cargo tie down
rings.
• do not use elastic straps or nets to secure
a load, as these are only intended as an
anti-s ...