Restricting the shift range
X Press the selector lever to the left towards D–.
The automatic transmission shifts down one gear and restricts the shift range to the relevant gear.
If the engine exceeds the maximum engine speed when shifting down, the automatic transmission protects against engine damage by not shifting down.
If the maximum engine speed for the shift range is reached and you continue to accelerate, the automatic transmission shifts up in order to prevent the engine from overrevving, even if the shift range is restricted.
Derestricting the shift range
Briefly press the selector lever to the right towards D+. The shift range is derestricted.
Clearing the shift range restriction
Press and hold the selector lever towards D+ until D is shown once more in the multifunction display. The automatic transmission shifts from the current shift range directly to D.
Selecting the ideal shift range
Press the selector lever to the left towards D– and hold it in position. The automatic transmission shifts to the gear which allows optimum acceleration and deceleration. To do this, the automatic transmission shifts down one or more gears.
Problems with the transmission
Problem
The transmission has problems shifting gear.
Possible causes/consequences and Solutions
The transmission is losing oil.
Have the transmission checked at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center, immediately.
Problem
The acceleration ability is deteriorating. The transmission no longer changes gear.
Possible causes/consequences and Solutions
The transmission is in emergency mode. It is only possible to shift into second gear and reverse gear.
- Stop the vehicle.
- Shift the transmission to position P.
- Switch off the engine.
- Wait at least 10 seconds before restarting the engine.
- Shift the transmission to position D or R. If D is selected, the transmission shifts into second gear; if R is selected, the transmission shifts into reverse gear.
- Have the transmission checked at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center, immediately.
See also:
Active Curve System
The Active Curve System uses active
stabilizers to optimize both driving comfort
and vehicle agility. Depending on the ADS
mode selected (Y page 180), the Active Curve
System also changes the ...
Exterior mirror out of position
If an exterior mirror has been pushed out of
position, proceed as follows:
- Vehicles without electrically folding
exterior mirrors: move the exterior mirror
into the correct position manually. ...
Releasing seat belts
- Press release button 4 and
guide belt tongue 2 back towards belt
sash guide 1.
Make sure that the seat belt
is fully rolled
up. Otherwise, the seat belt or belt tongue
will be trapped in ...