Defrosting the windshield
You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows.
You should only select the defrosting function until the windshield is clear
again.
- Turn the SmartKey to position 2 in the ignition lock.
- To activate: press the ¬ button. The indicator lamp in the ¬ button lights up.
The climate control system switches to the following functions:
- cooling with air dehumidification on
- high airflow
- high temperature
- air distribution to the windshield and front side windows
- air-recirculation mode off
- To switch off: press the
button. The indicator lamp in the
button goes out. The previously
selected settings come into effect again. The cooling with air dehumidification
function remains on. Airrecirculation mode remains deactivated.
or
- Press the
button. The indicator
lamp in the button goes out. Airflow
and air distribution are set to automatic mode.
or
X Turn temperature control 1 or 8 clockwise or counter-clockwise ().
or
- Press the
or
button.
See also:
Important safety notes
You will find an illustration of the instrument
cluster in the "At a glance".
WARNING
A driver's attention to the road and traffic
conditions must always be his/her primary
focus wh ...
Coupling up a trailer
Observe the maximum permissible trailer dimensions (width and length).
Most U.S. states and all Canadian provinces require by law:
safety chains between the towing vehicle and the trailer. The ch ...
DEF
Important safety notes
For BlueTEC vehicles only.
DEF is a non-flammable, non-toxic, colorless,
odorless and water-soluble fluid.
Only use DEF that complies with
ISO 22241. Do not add any ...